Electronics requires 100% Dry, Clean Oil-free Compressed Air  

As more and more daily necessities are connected through the Internet of Things, compressed air is becoming more and more widely used in the electronics industry. In the electronics industry, compressed air is typically used for the following purposes:

PCB Cleaning

After the production of the PCB is completed, use the air to blow it clean.

Conveyors

A pneumatic devices with compressed air transmission components.

Dry Electronic Component

Utilize our technology to dry and clean electronic components, such as printed circuit boards.

Pick up

The circuit board consists of transistors, brakes, etc. Complete and play through the vacuum assisted pipette.

During the manufacturing and assembly process, unattractive compressed air will contain a certain amount of moisture. This will cause a short circuit and loss of signal between the electronic components and the lens loser. In addition, oil contamination in compressed air will result in expensive equipment maintenance costs, and even the failure of the entire production line.

It is therefore necessary to use a 100% oil-free air compressor in electronics manufacturing, along with a series of compressed air treatment to achieve a truly oil-free environment.

Energy can be saved by choosing the right air treatment and filtration. In Yunair, we are a production company with decades of experience in providing cleaning, dry air and energy saving solutions.

The aluminum plate refrigerated air dryer we provided uses advanced refrigeration technology to cool the air and then heat it to reduce the humidity of the air. The dew point pressure is 3 ° C.

Heat and heatless adsorption dryers use desiccants to remove moisture. Like all dual tower design, the dryer continues to regenerate the desiccant by switching the tower between the inhalation and cooling cycle, thereby continuously supplying dry compressed air.

With advance filtering technology, Yunair’s stainless steel air filter and activated carbon filter remove particles up to 0.01 microns from the air and residual oil content to 0.001ppm, the air quality meets the standard ISO853.1-2010 level 1 cleaning requirements. Ensure that the air sources supplied are completely dry and clean.

For more questions or inquiries about our compressed air treatament for electornic industry, please feel free to contact us!