WL series refrigeration compressed air dryers utilize the principle of refrigeration to cool compressed air and discharge condensate water to dry compressed air. The pressure dew point can be as low as +5℃.
Clean, dry, and contaminant-free compressed air is essential to safe, efficient and energy-saving equipment operation. Pollutants in compressed air can cause equipment operation failure, damage, and even endanger human life and health. High-efficiency filtration and drying of compressed air are basic measures to save costs and ensure safety.
We have many years of production and application experience. We are familiar with air drying and filtration technology, advanced production equipment and testing equipment to ensure that every product produced meets the requirements of international standards.
Product Features
• Stable pressure dew point.
• Heat exchange efficiency of the independent composite heat exchanger is over 5% higher than that of general-purpose plates, and 15% to 30% higher than traditional shell-and-tube heat exchangers.
• Pipeline design with fewer components and soldering points to reduce the risk of refrigerant leakage.
• All-in-one aluminum plate heat exchanger with low inlet/outlet temperature difference. Electrical timed drain to ensure condensate drainage.
• Eco-friendly - R134A and R410A refrigerants with cold energy recovery.
• Intelligent control -With dew point display and fault alarm function.
• The heat exchanger of WL010 is fabricated from stainless steel 304, whereas the heat exchangers of the other Models are fabricated from aluminum alloy plate.
• A configuration can be tailored to meet your specific requirements, such as your logo, PLC, and Modbus protocol.
Working Condition
Voltage 220V 50Hz.
Special voltage can be customized
Standard working pressure: 7 bar g
Allowed max. working pressure: 16 bar g
Allowable inlet temperature：1- 45℃
Standard ambient temperature: 38℃ for WL010 to WL250
Standard ambient temperature: 35℃ for WL265
Allowed ambient temperature: 1-45℃